Strongdor Innovative Adjust‑to‑Fit Sizes: Installation Guidance

Ensuring your door is fitted correctly is a crucial part of any successful installation. A properly aligned frame not only allows the door to operate smoothly but also helps prevent long‑term issues such as misalignment, twisting, or uneven gaps.

Five Simple Steps to the Perfect Fit.

Step 1: Align the Frame

Firstly, the frame needs to be aligned with the door frame opening. Without doing this, the door won’t fit into the frame correctly.

Step 2: Square and Secure Using Adjuster Screws

Use the adjuster screws to pull the frame tight and bring it square in the opening. Work gradually, adjusting each point a little at a time, and re-check as you go to prevent twist or bowing and keep even gaps.

Step 3: Drill Fixing Points

With the frame held firmly in its correct position, drill through the frame adjuster screws to create accurate fixing points.

Step 4: Insert Frame Fixers

Insert the frame fixers into the drilled holes and locate them fully before tightening.

Step 5: Fully Tighten the Fixers

Fully tighten the frame fixers until the heads sit recessed around halfway into the frame adjuster screws.

Need Further Support?

If you require additional guidance or have any questions regarding the installation of Strongdor products, our Technical Experts are on hand to help.
???? Call us on 01524 297664 for expert advice and support.